Filtration Applications
Authorized Channel Partner For AMIAD Water System :
Nozzles Protection
Spray nozzles are used throughout manufacturing processes, usually for product cooling or washing. Nozzles wear over time, affecting production efficiency and product quality, increasing maintenance costs, and impacting revenue. The best approach is to protect nozzles by installing filtration to reduce the number of particles that can cause erosion and clogging of the feed water. Our efficient filtration solutions enable nozzles to operate without blockage or erosion, increasing their lifespan and keeping processes steady and efficient.
TSS / Turbidity Removal
Measuring TSS and turbidity is a key parameter when testing water quality; the higher the TSS / turbidity level, the lower the quality. With strict water quality standards usually requiring fine filtration of 10 microns or less, our complete line of efficient fine filtration solutions is ideal for TSS / turbidity reduction.
MF / UF/ RO Protection
Effective prefiltration is essential to protecting and improving the integrity of membranes and maximizing their performance. Our solutions for membrane pre-filtration applications reduce the particle load, especially those that can cause mechanical damage, save flushing water, energy, and chemical use, and provide increased membrane reliability and lifespan.
Membrane manufacturers require fine filtration as a pre-treatment process to prevent clogging and physical damage to the membrane surface and layers and reduce biofilm formation. Our solutions for fine membrane pre-filtration reduce chemical use, lower energy costs and save on membrane replacement.
UV Protection
Prefiltration for UV water treatment is required for two reasons. The first is to remove large particles that would otherwise shield microorganisms from the UV light. The second is to reduce the turbidity for improved UVT (UV transmittance). Our advanced filtration technologies will reduce the "shadow effect" and remove large suspended solids, keeping UV systems working effectively and efficiently.
Sand Separation
Sand separation is vital to keeping sand out of the distribution line, where it causes wear and tear, maintenance issues, and energy loss. Our sand separators and filters are essential in any filtration system where sand is an issue and, when flushed regularly, require minimal maintenance.
Cooling Tower Filtration
Makeup water aims at completing the volume of water lost through evaporation, blowdown, and draft and is usually added to the cooling tower basin. Water treatment is needed and can increase the cycles in the cooling tower, reduce water consumption by up to 50% and consequently reduce the cooling tower blow down (wastewater), as well as reduce the chemical consumption for water conditioning. Our filtration solutions provide more stable water quality, lower fouling and corrosion, reduced chemicals used, and process optimization.
Cooling tower systems are most efficient when heat transfer surfaces are clean. As cooling towers operate outdoors, they are vulnerable to dirt and debris, which can cause scaling, fouling, and microbiological activity. Our range of 25-100 micron side stream filters for 5-15% of the side-stream flow provides a cost-effective solution to increase system efficiency, reduce corrosion rates, maintenance costs, and chemical use.
Reclaim Backwash Water From Media and AC Filters
Large sand and activated carbon filters are sometimes used by water treatment plants. These filters require a substantial amount of water for their cleaning processes (backwash). By collecting this water and treating it with filtration, it can be reused, or returned to the process. Our filtration technologies successfully treat backwash water and our filter line provides a wide range of filtration degrees and flow rates that can handle the challenges involved when using reclaimed water for industrial applications.
Rainwater Harvesting
Rainwater harvesting helps industrial facilities to reduce water consumption costs and the environmental impact across their operations. Operators are realizing the benefits of using rainwater for such purposes as flushing plumbing fixtures, irrigating parks and fields, vehicle washing and mechanical make-up feed water for industrial processes. Treatment is necessary and typically involves coarse filtration downstream the central storing unit and may include fine filtration as well. Our advanced, efficient filtration technologies have a wide range of filtration degrees, require minimal maintenance and save resources.
Pump Seal Protection
Filtration is important for protecting pump seals and bearings, as it removes particles especially those with hard exteriors. These particles can cause damage that requires seal and/or bearings replacement and leads to costs incurred by labor and spare parts. Our wide range of reliable, durable filtration solutions efficiently protect these systems and save energy and costly maintenance.
Removal of Invasive Species
Quagga and zebra mussels can easily spread and transfer from one water source to another and cause serious clogging damage to industrial water systems, leading to high maintenance and energy costs. Filtration of 50 to 20 microns is required, and our wide range of cost-effective filtration solutions and technologies effectively remove invasive species.
